|
DESCRIPTION: BOYSEN® Gloss Lacquer Enamel White B-1200 is a high-grade, pigmented lacquer topcoat. It is highly recommended for industrial, residential and commercial usage and for product finishing.
PRINCIPAL USES: It is a durable finish for wood and metal surfaces not directly exposed to weathering.
FINISH: Gloss
DRY TIME:
Touch: 30 minutes
Recoat: 1 hour
THEORETICAL COVERAGE PER 4-LITERS: 25 - 30 sq.m.
*Depending on surface texture and porosity
THINNING SOLVENT: BOYSEN® Lacquer Thinner B-50
CLEAN-UP SOLVENT: BOYSEN® Lacquer Thinner B-50
PACKAGING: 1-Liter and 4-Liters
APPLICATION: Apply by spray
|
|
DESCRIPTION: BOYSEN® Gloss Lacquer Enamel White B-1200 is a high-grade, pigmented lacquer topcoat. It is highly recommended for industrial, residential and commercial usage and for product finishing.
PRINCIPAL USES: It is a durable finish for wood and metal surfaces not directly exposed to weathering.
FINISH: Gloss
DRY TIME:
Touch: 30 minutes
Recoat: 1 hour
THEORETICAL COVERAGE PER 4-LITERS: 25 - 30 sq.m.
*Depending on surface texture and porosity
THINNING SOLVENT: BOYSEN® Lacquer Thinner B-50
CLEAN-UP SOLVENT: BOYSEN® Lacquer Thinner B-50
PACKAGING: 1-Liter and 4-Liters
APPLICATION: Apply by spray
|
|
SURFACE PREPARATION:
Wooden Surfaces
Surface to be painted should be clean and dry, free from dust, dirt, and other foreign matter. Hammer all nails deep enough to apply putty. Sand rough wood until smooth and then dust off before painting.
Metal Surfaces
Wipe the surface with a rag soaked in paint thinner to remove grease, oil, wax and other foreign matter. For new galvanized surfaces, etch the surface by applying 10% BOYSEN® Metal Etching Solution B-71 (Dilute 1 part of B-71 to 9 parts water). Rinse with water and dry immediately.
Unpainted galvanized surfaces that have been exposed for 6 months or more need not be etched.
Treat rusted steel by sanding and wire brushing. Use BOYSEN® Metal Etching Solution B-71 on remaining rust. Let it stay for 10-15 minutes. Be sure to remove all remaining residue. Immediately prime after drying.
Repainting
Scrape off all loose, scaling, flaking, and peeling paint as necessary. Make sure the surface is clean, dry, and good weather persists prior to painting.
PAINTING SCHEDULE:
Wooden Surfaces
1st coat: BOYSEN® Lacquer Primer Surfacer B-305
2nd coat: BOYSEN® Lacquer Spot Putty B-306
3rd coat: BOYSEN® Lacquer Primer Surfacer B-305
Final Coat: BOYSEN® Gloss Lacquer Enamel White B-1200 (in required coats)
Metal Surfaces
Primer: BOYSEN® Epoxy Primer
2nd & 3rd Coat: BOYSEN® Gloss Lacquer Enamel White B-1200 (in required coats)
|
