|
DESCRIPTION: Nation™ Red Oxide Metal Primer is an economy-line rust inhibiting primer for steel substrates. It provides good corrosion resistance for metal surfaces.
PRINCIPAL USES: It is ideal as a primer for exterior and interior steel
DRY TIME:
Touch: 2 hours
Recoat: 12 hours
THEORETICAL COVERAGE PER 4-LITERS:
25 - 30 sq.m.
*Depending on surface texture and porosity
THINNING SOLVENT: Thin with not more than 1-Liter of BOYSEN® Paint Thinner B-0340 per 4-Liter can of Nation™ alkyd enamel products.
CLEAN-UP SOLVENT: BOYSEN® Paint Thinner B-0340
PACKAGING: 1-Liter, 4-Liters, and 16-Liters
APPLICATION: By brush or roller
|
|
DESCRIPTION: Nation™ Red Oxide Metal Primer is an economy-line rust inhibiting primer for steel substrates. It provides good corrosion resistance for metal surfaces.
PRINCIPAL USES: It is ideal as a primer for exterior and interior steel
DRY TIME:
Touch: 2 hours
Recoat: 12 hours
THEORETICAL COVERAGE PER 4-LITERS:
25 - 30 sq.m.
*Depending on surface texture and porosity
THINNING SOLVENT: Thin with not more than 1-Liter of BOYSEN® Paint Thinner B-0340 per 4-Liter can of Nation™ alkyd enamel products.
CLEAN-UP SOLVENT: BOYSEN® Paint Thinner B-0340
PACKAGING: 1-Liter, 4-Liters, and 16-Liters
APPLICATION: By brush or roller
|
|
SURFACE PREPARATION:
Wipe the surface with a rag soaked in paint thinner to remove grease, oil, wax and other foreign matter. For new galvanized surfaces, etch the surface by applying 10% BOYSEN® Metal Etching Solution B-71 (Dilute 1 part of B-71 to 9 parts water). Rinse with water and dry immediately.
Unpainted galvanized surfaces that have been exposed for 6 months or more need not be etched.
For recoating pre-painted galvanized surfaces in good condition, sand lightly then wipe the surface with a clean rag before applying paint. Remove all loose paint film to sound surface. Spot prime bare substrate.
For corroded galvanized surfaces, remove rust by wire brushing and use BOYSEN® Metal Etching Solution B-71. Let it stay for 10 - 15 minutes. Be sure to remove all remaining residue. Immediately prime after drying.
PAINTING SCHEDULE:
1st coat: Nation™ Red Oxide Metal Primer NS-610
2nd & 3rd coat: Nation™ Fast Dry Enamel or Nation™ Dura-Roof™
|
