|
DESCRIPTION: BOYSEN® Lacquer Sanding Sealer B-1254 is a commercial grade nitrocellulose-based sealer for wood. It is used before finishing with either gloss or flat lacquer. It requires less sanding and has good sealing and hold- out properties.
PRINCIPAL USES: It is ideal for interior sealed wood such as furniture, store fixtures, cabinets, doors, and panels.
SERVICE CONDITIONS: If necessary, add approximately 10% by volume of BOYSEN® Lacquer Flo B-1205 to the ready-to-use mixture.
DRY TIME:
Touch: 10 minutes
Recoat: 1 hour
THEORETICAL COVERAGE PER 4-LITERS: 25 - 30 sq.m.
*Depending on surface texture and porosity
TINTING: Do not tint.
THINNING SOLVENT: BOYSEN® Lacquer Thinner B-50
CLEAN-UP SOLVENT: BOYSEN® Lacquer Thinner B-50
PACKAGING: 1-Liter, 4-Liters and 16-Liters
APPLICATION: By spray
|
|
DESCRIPTION: BOYSEN® Lacquer Sanding Sealer B-1254 is a commercial grade nitrocellulose-based sealer for wood. It is used before finishing with either gloss or flat lacquer. It requires less sanding and has good sealing and hold- out properties.
PRINCIPAL USES: It is ideal for interior sealed wood such as furniture, store fixtures, cabinets, doors, and panels.
SERVICE CONDITIONS: If necessary, add approximately 10% by volume of BOYSEN® Lacquer Flo B-1205 to the ready-to-use mixture.
DRY TIME:
Touch: 10 minutes
Recoat: 1 hour
THEORETICAL COVERAGE PER 4-LITERS: 25 - 30 sq.m.
*Depending on surface texture and porosity
TINTING: Do not tint.
THINNING SOLVENT: BOYSEN® Lacquer Thinner B-50
CLEAN-UP SOLVENT: BOYSEN® Lacquer Thinner B-50
PACKAGING: 1-Liter, 4-Liters and 16-Liters
APPLICATION: By spray
|
|
SURFACE PREPARATION:
Sand surface until wood is smooth to the touch. Hammer all nails deep enough to apply wood filler. Dust off surfaces completely then wipe with a clean rag. If repainting, remove all paint by using manual or mechanical methods prior to the application of BOYSEN® Lacquer Sanding Sealer.
MATERIAL PREPARATION:
10% by volume of BOYSEN® Lacquer Flo B-1205 is added to the ready-to-use topcoat mixture just before application to prevent moisture blushing during relatively cold or damp climate conditions.
PAINTING SCHEDULE:
Stain: BOYSEN® Oil Wood Stain (optional)
Sealer Coat: BOYSEN® Lacquer Sanding Sealer B-1254, sanded lightly before topcoat application
Final coat: BOYSEN® Clear Gloss Lacquer B-1250, Clear Dead Flat Lacquer B-1253, or Water White Clear Gloss Lacquer B-1258
|
