|
DESCRIPTION: BOYSEN® BUG OFF™ with Artilin® Anti-Insect Technology is a water-based, low-VOC, anti-insect paint that is scientifically proven to kill disease-causing insects like mosquitoes for at least 3 years after application.
FEATURES: BOYSEN® BUG OFF™ has inert microscopic crystals set in the paint layer that attack the nervous system of insects that get in contact with the painted surface.
PRINCIPAL USES: It is recommended for walls and ceilings inside the house where it can quietly kill insects that use these surfaces for resting. It can also be used on exterior surfaces where harmful insects may gather. It is ideal for concrete, drywall, and properly primed wooden surfaces.
*Avoid using product on high friction areas such as fixtures and furniture.
SERVICE CONDITIONS:
Cleaning and Maintenance
Carefully adhere to Surface Preparation and Painting Schedule instructions. Do not clean the painted surfaces within 7 days of application. To maximize the efficacy of BOYSEN® BUG OFF™, lightly clean painted surface with a damp, non-abrasive cloth to remove dust. Do not use soap or detergents.
FINISH: Flat
DRY TIME:
Touch: 30 minutes
Recoat: 1 hour
THEORETICAL COVERAGE PER 4-LITERS:
30 - 35 sq. m. as topcoat
*Depending on surface texture and porosity
TINTING: Will accept BOYSEN® Latex Colors at a maximum level of ¼ Liter per 4-Liter can. Take note that B-1466 Hansa Yellow and B-1407 Toluidine Red are for interior painting only.
THINNING SOLVENT: To keep its efficacy, BUG OFF™ paint should not be diluted nor mixed with any other paint.
CLEAN-UP SOLVENT: Water
PACKAGING: 1-Liter & 4-Liters
APPLICATION: By brush or roller. Do not apply by spray.
SHELF LIFE: 3 years from the date of manufacture
*When kept unopened and stored in proper conditions
|
|
DESCRIPTION: BOYSEN® BUG OFF™ with Artilin® Anti-Insect Technology is a water-based, low-VOC, anti-insect paint that is scientifically proven to kill disease-causing insects like mosquitoes for at least 3 years after application.
FEATURES: BOYSEN® BUG OFF™ has inert microscopic crystals set in the paint layer that attack the nervous system of insects that get in contact with the painted surface.
PRINCIPAL USES: It is recommended for walls and ceilings inside the house where it can quietly kill insects that use these surfaces for resting. It can also be used on exterior surfaces where harmful insects may gather. It is ideal for concrete, drywall, and properly primed wooden surfaces.
*Avoid using product on high friction areas such as fixtures and furniture.
SERVICE CONDITIONS:
Cleaning and Maintenance
Carefully adhere to Surface Preparation and Painting Schedule instructions. Do not clean the painted surfaces within 7 days of application. To maximize the efficacy of BOYSEN® BUG OFF™, lightly clean painted surface with a damp, non-abrasive cloth to remove dust. Do not use soap or detergents.
FINISH: Flat
DRY TIME:
Touch: 30 minutes
Recoat: 1 hour
THEORETICAL COVERAGE PER 4-LITERS:
30 - 35 sq. m. as topcoat
*Depending on surface texture and porosity
TINTING: Will accept BOYSEN® Latex Colors at a maximum level of ¼ Liter per 4-Liter can. Take note that B-1466 Hansa Yellow and B-1407 Toluidine Red are for interior painting only.
THINNING SOLVENT: To keep its efficacy, BUG OFF™ paint should not be diluted nor mixed with any other paint.
CLEAN-UP SOLVENT: Water
PACKAGING: 1-Liter & 4-Liters
APPLICATION: By brush or roller. Do not apply by spray.
SHELF LIFE: 3 years from the date of manufacture
*When kept unopened and stored in proper conditions
|
|
SURFACE PREPARATION:
New Concrete
Allow new concrete to dry for 14 - 28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar. If neutralizing, treat surface with a solution of 1 part BOYSEN® Masonry Neutralizer B-44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting. However, if the concrete has been cured for more than 28 days, there is no need for neutralizer.
Wooden Surfaces
Surface to be painted should be clean and dry, free from dust, dirt, and other foreign matter. Hammer all nails deep enough to apply putty. Sand rough wood until smooth and then dust off before painting. Avoid using product on high friction areas.
Drywall Substrates
Install and secure joints as per manufacturer’s recommendations.
Repainting
Scrape off all loose, scaling, flaking, and peeling paint manually or by using a paint and varnish remover, as necessary. Wash surfaces clean and completely remove chemical residue. Let it dry.
For repainting concrete with chalky old paint, use BOYSEN® Chalk Blocker™ B-7304 as a surface conditioner. In case of mildew infestation, treat with a bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, let stand for 24 hours before cleaning off residue. Let dry.
For repainting other surfaces such as wood, follow the first step then apply the appropriate primer before recoating.
PAINTING SCHEDULE:
For Concrete and Drywall Surfaces
Primer: BOYSEN® Permacoat™ B-701 or EcoPrimer™ B-105
Putty: BOYSEN® Masonry Putty B-7311 (interior) or BOYSEN® Acrytex™ Cast B-1711 (exterior)
2nd & 3rd coat: BOYSEN® BUG OFF™
For Wooden Surfaces
Primer: BOYSEN® Flatwall Enamel B-800
Putty: BOYSEN® Plasolux Glazing Putty B-311
2nd & 3rd coat: BOYSEN® BUG OFF™
|
